Three-phase electric power monitors appearance

Product data

Product brief introduction

The electric energy that ZT2040 n appearance uses contemporary number signal to handle chip and high accuracy is metric chip, can measure the parameter of all and commonly used electric power in three-phase electrified wire netting steadily accurately: Power of electric current of three-phase voltage, three-phase, have rendered great service, without result power, inspect in factor of power, mains frequency, power, electric energy, voltage lopsided degree, electric current is lopsided degree, harmonic of voltage harmonic, electric current.

Detailed parameter

Function			Parameter
The input is measured show	Voltage	Network	Three-phase 3 lines, three-phase 4 lines
		Rating	AC 100V / AC 220V / AC 380V
		Pass negative charge	1.2 times rating (successive) times rating of; 2 / 1 second
		Power	<0.4VA(every photograph)
		Impedance	> 500kΩ
		Precision	RMS is measured, accuracy class 0.5
	Electric current	Rating	AC 1A/5A
		Pass negative charge	1.2 times rating (successive) times rating of; 10 / 1 second
		Power	<0.2VA (every photograph)
		Impedance	<2mΩ
		Precision	RMS is measured, accuracy class 0.5
	Frequency		45~65Hz
	Power		Inspect in power, precision of have rendered great service 0.5 class, without result precision 1 class
	Electric energy		Time-sharing 4 quadrant are metric, precision of have rendered great service 0.5 class, without result precision 1 class
Power source	Working limits		AC/DC85~270V
	Power comsumption		≤5VA
Output	Digital interface		Agreement of RS485 interface, Modbus-RTU
	Pulse output		Pulse constant: 5000imp/KWh
Environment	Working environment		- 10~55 ℃
	Store environment		- 20~75 ℃
Safe	Compression		Input / power source > 2kV/1min, input / output > 2kV/1min, power source / output > 1.5kV/1min(50Hz)
	Be isolated from		Input, output, power source is right housing > 100MΩ
Electric energy measures range			Have rendered great service is spent without result report measure limits 0~999999Mwh, exceed report of this numerical value to spend from 0 begin computation

Product Features&Advantages

High reliability

99.999% availability, N+X redundancy, meets GB50174 A/B class standards

Fully self-developed

Micro-modules / UPS / Air Conditioning / Power Distribution / Liquid Cooling / DCIM - Fully independently developed and produced

Quick Deployment

Factory prefabrication, on-site assembly, 60% reduction in delivery cycle

High-efficiency and energy-saving

AI energy saving, cold and hot isolation, liquid cooling, PUE as low as 1.15

Five-star after-sales service

National network of branches, 7x24 response, full lifecycle operation and maintenance services

Own factory

30,000 sq m production base, standardized quality control, supports customized production

Product brief introduction

Detailed parameter

Security verification